Products description

 TT6936 silicone electronic sealant is low-viscosity,one-component, dealcoholization room-temperature cured silicone sealant which cures when exposed to moisture in the air.The product has high strength、good adhesion、extensive application and non-corrosion,which could protect electronics in all kinds of severe condition.

 Properties :

1. Excellent adhesion to metals such as aluminum、copper and stainless steel .
2. Excellent electrical performance and thermotolerance. Operating temperature ranges from -60℃ to 200℃.
3. Release alcohols during solidification and could not corrode PC and copper etc.
4. Fast cure,easy construction,after cured could reduce damages to electronics caused by mechanic、heat shock and shake.
5. Complete accordance to ROHS of EU mandating requirements.

Performance indicators

*All properties are measured 7 days after curing at 25 ℃, 55% relative humidity conditions.

Technology and operation

1. Clean the surface:clean the sizing surface and remove dust and oil pollution
2. Sizing glue:cut open the rubber tube,push the glue onto the sizing surface and homogenize.Then fold the adhesive faces and fix .
3. Cure:expose the sticked and sealed components to the air to cure spontaneously.Cure begins at the surface and process to the inside.Within 24h(room temperature and 55%RH),the curing depth would reach 2~4mm.If the location of sizing is deeper,especially locations hard to contract the air,the complete curing time would extend.The same would happen when temperature is lower.
4. Notice:after the operation,the remained glue should be sealed immediately.It can be used normally next time after removing condensates.

Package

 310ml/b  25b/case

100ml/b  100b/case

Storage and transport

1. Room temperature can be stored for 9 months
2. Transport and store sealed as non-dangerous goods;